Inicio> Blog> Fin Evaporator for Refrigerator (FP)

Fin Evaporator for Refrigerator (FP)

March 18, 2024
Model NO.: FP
Design Service: Be Available
Fin Thickness: 0.105mm-0.4mm
Liquid Flow Rate: 2.5m^3/S
Tube Type: Smooth Tube, Thread Tube
Maximum Working Pressure: 3.0MPa
Structure: Fin Type Heat Exchanger
Trademark: Shenglin
Transport Package: Standard Carton with Plywood
Specification: CE
Origin: Shanghai, China(Mainland)
HS Code: 8415909000
Model NO.: FP
Design Service: Be Available
Fin Thickness: 0.105mm-0.4mm
Liquid Flow Rate: 2.5m^3/S
Tube Type: Smooth Tube, Thread Tube
Maximum Working Pressure: 3.0MPa
Structure: Fin Type Heat Exchanger
Trademark: Shenglin
Transport Package: Standard Carton with Plywood
Specification: CE
Origin: Shanghai, China(Mainland)
HS Code: 8415909000
Brief description:
1. Heat Exchangers
2. Can be customerized
3. Work Pressure: 0.2~3.1MPa
4. Fin space: 1.2~3.5mm
5. Tube Diameter: 7, 9.52, 12.7, 16mm.

Packing detail: We accept you package design, if you have special demand, if not,
We will provide an individual package for you.

The technology to create perfection:
1. The fins produced are of vry high standard of quality having flare position made of plain,
Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.

Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8- 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing

Fin Evaporator for Refrigerator (FP)
Fin Evaporator for Refrigerator (FP)Fin Evaporator for Refrigerator (FP)
Fin Pattern Copper Tube O. D. (mm) Row Space(mm) Hole Space(mm) Fin

Thickness(mm)
 
Fin Space(mm)
Flat fin Sine wave with blade fin Smooth sine wave fin Window fin Sesamoid fin
A 7 12.7 21 0.105 / / 1.3 1.3 /
B 7 13.2 17.6 0.105 / / 1.3 1.3 /
C 7 12.7 20.4 0.105 / / 1.3~1.8 1.3~1.8 /
D 7.94 15.88 25.4 0.105 1.8~3.0 1.8~3.0 1.8~3.0 1.8~3.0 /
E 9.52 22 25.4 0.105~0.15 1.6~3.2 1.6~3.2 1.6~3.2 1.6~3.2 /
F 9.52 22 25.4 0.18~0.4 3.5~6.35 / / / /
G 9.52 21.65 25 0.105~0.18 1.6~3.2 1.6~3.2 1.6~3.2 1.6~3.2 /
H 9.52 21.65 25 0.15~0.24 3.2~6.35 3.2~6.35 3.2~6.35 / /
I 12.75 27.5 31.75 0.115~0.15
 
1.5~3.5 1.5~3.5 1.5~3.5 1.5~3.5 1.6~3.2
J 15.88 33 38.1 0.115~0.15 1.5~4.0 1.5~4.0 1.5~4.0 / /
K 15.88 34.64 40 0.115~0.15 / 2.6~3.5 2.6~3.5 / /
Item Evaporator Type Operation medium Operation pressure
(MPa)
Application
1 Φ16/Φ9.52/Φ12.7
Copper tube with aluminium fin
Cold/hot water ≤1.6 Used for combined air handling unit, fan coil etc air conditioning devices
2 Φ18/Φ20
Steel pipe winding with steel sheet
Steam ≤0.2 Used for combined air handling unit, fan coil etc air conditioning devices
3 Φ16/Φ9.52/Φ12.7
Copper tube with aluminium fin
Brine ≤1.6 Used for heat transfer in cold storage and all kinds of low temperature systems
4 Φ9.52/Φ7.94/Φ7
Copper tube with aluminium fin
Ethylene glycol ≤1.6 Used of energy recovery and low temperature system devices
5 Φ16
Copper tube with aluminium fin
Ice mud ≤1.6 Used for dry operation condition, fresh air dehumidification etc systems
6 Φ9.52/Φ7.94/Φ7
Copper tube with aluminium fin
R22 ≤1.9 Used for industry and commerce air conditioning system
7 Φ9.52/Φ7.94/Φ7
Copper tube with aluminium fin
R407C ≤1.9 Used for industry and commerce air conditioning system
8 Φ9.52/Φ7.94/Φ7
Copper tube with aluminium fin
R134a ≤3.1 Used for vehicle and vessel etc transportation devices

Note: for further information please contact me.

Ruby Yang

 

Mobile: +86 155 3818 3231
  Brief description:
1. Heat Exchangers
2. Can be customerized
3. Work Pressure: 0.2~3.1MPa
4. Fin space: 1.2~3.5mm
5. Tube Diameter: 7, 9.52, 12.7, 16mm.

Packing detail: We accept you package design, if you have special demand, if not,
We will provide an individual package for you.

The technology to create perfection:
1. The fins produced are of vry high standard of quality having flare position made of plain,
Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.

Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8- 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing

Fin Evaporator for Refrigerator (FP)
Fin Evaporator for Refrigerator (FP)Fin Evaporator for Refrigerator (FP)
Fin Pattern Copper Tube O. D. (mm) Row Space(mm) Hole Space(mm) Fin

Thickness(mm)
 
Fin Space(mm)
Flat fin Sine wave with blade fin Smooth sine wave fin Window fin Sesamoid fin
A 7 12.7 21 0.105 / / 1.3 1.3 /
B 7 13.2 17.6 0.105 / / 1.3 1.3 /
C 7 12.7 20.4 0.105 / / 1.3~1.8 1.3~1.8 /
D 7.94 15.88 25.4 0.105 1.8~3.0 1.8~3.0 1.8~3.0 1.8~3.0 /
E 9.52 22 25.4 0.105~0.15 1.6~3.2 1.6~3.2 1.6~3.2 1.6~3.2 /
F 9.52 22 25.4 0.18~0.4 3.5~6.35 / / / /
G 9.52 21.65 25 0.105~0.18 1.6~3.2 1.6~3.2 1.6~3.2 1.6~3.2 /
H 9.52 21.65 25 0.15~0.24 3.2~6.35 3.2~6.35 3.2~6.35 / /
I 12.75 27.5 31.75 0.115~0.15
 
1.5~3.5 1.5~3.5 1.5~3.5 1.5~3.5 1.6~3.2
J 15.88 33 38.1 0.115~0.15 1.5~4.0 1.5~4.0 1.5~4.0 / /
K 15.88 34.64 40 0.115~0.15 / 2.6~3.5 2.6~3.5 / /
Item Evaporator Type Operation medium Operation pressure
(MPa)
Application
1 Φ16/Φ9.52/Φ12.7
Copper tube with aluminium fin
Cold/hot water ≤1.6 Used for combined air handling unit, fan coil etc air conditioning devices
2 Φ18/Φ20
Steel pipe winding with steel sheet
Steam ≤0.2 Used for combined air handling unit, fan coil etc air conditioning devices
3 Φ16/Φ9.52/Φ12.7
Copper tube with aluminium fin
Brine ≤1.6 Used for heat transfer in cold storage and all kinds of low temperature systems
4 Φ9.52/Φ7.94/Φ7
Copper tube with aluminium fin
Ethylene glycol ≤1.6 Used of energy recovery and low temperature system devices
5 Φ16
Copper tube with aluminium fin
Ice mud ≤1.6 Used for dry operation condition, fresh air dehumidification etc systems
6 Φ9.52/Φ7.94/Φ7
Copper tube with aluminium fin
R22 ≤1.9 Used for industry and commerce air conditioning system
7 Φ9.52/Φ7.94/Φ7
Copper tube with aluminium fin
R407C ≤1.9 Used for industry and commerce air conditioning system
8 Φ9.52/Φ7.94/Φ7
Copper tube with aluminium fin
R134a ≤3.1 Used for vehicle and vessel etc transportation devices

Note: for further information please contact me.

Ruby Yang

 

Mobile: +86 155 3818 3231
 
Contal Us

Autor:

Mr. yupin guo

Correo electrónico:

sales@yukuncool.com

Phone/WhatsApp:

+8613569837024

productos populares
También te puede gustar
Categorías relacionadas

Contactar proveedor

Asunto:
Email:
Mensaje:

Tu mensaje MSS

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Enviar